Skip to Content
chevron-left chevron-right chevron-up chevron-right chevron-left arrow-back star phone quote checkbox-checked search wrench info shield play connection mobile coin-dollar spoon-knife ticket pushpin location gift fire feed bubbles home heart calendar price-tag credit-card clock envelop facebook instagram twitter youtube pinterest yelp google reddit linkedin envelope bbb pinterest homeadvisor angies

Operating and Maintaining Your Heat Pump

Proper operation of your heat pump will save energy. Do not set back the heat pump’s thermostat if it causes the backup heating to come on; backup heating systems are usually more expensive to operate. Continuous indoor fan operation can degrade heat pump performance unless a high-efficiency, the variable-speed fan motor is used. Operate the system on the “auto” fan setting on the thermostat.

Like all heating and cooling systems, proper maintenance is key to efficient operation. The difference between the energy consumption of a well-maintained heat pump and a severely neglected one ranges from 10%–25%.

Clean or change filters once a month or as needed, and maintain the system according to the manufacturer’s instructions. Dirty filters, coils, and fans reduce airflow through the system. Reduced airflow decreases system performance and can damage your system’s compressor. Clean outdoor coils whenever they appear dirty; occasionally, turn off power to the fan and clean it; remove vegetation and clutter from around the outdoor unit. Clean the supply and return registers within your home, and straighten their fins if bent.

Contact Us

technician's tools and talking to a customer

Having Your Pump Serviced

You should also have a professional technician service your heat pump at least every year. The technician can do the following:

  • Inspect ducts, filters, blower, and indoor coil for dirt and other obstructions
  • Diagnose and seal duct leakage
  • Verify adequate airflow by measurement
  • Verify correct refrigerant charge by measurement
  • Check for refrigerant leaks
  • Inspect electric terminals, and if necessary, clean and tighten connections, and apply nonconductive coating
  • Lubricate motors, and inspect belts for tightness and wear
  • Verify correct electric control, making sure that heating is locked out when the thermostat calls for cooling and vice versa
  • Verify correct thermostat operation.

Contact Your Local Plumbing, Heating, and Air Conditioning Pros Today!